| Home | Actions | Custom Rifles | Accessories | FAQ | News | International dealers | Contact Us |
| Model P |
| Model PC |
| Model PL |
| Model PLM |
| Model PT (Discontinued) |
| Model P Chey |
| Model S |
| Model SC |
| Model SM |
| Model GP |
| Barnard Tactical Rifles |
| TR Rifle |
| Barnard FTR Rifle's |
| Barnard F-Class Rifle's |
| GP Rifle-'grandepuissance' |
| NB F-Class Rifle Stock Chassis |
| Joe West Separate Stock Chassis |
| Dolphin Modular Stock Chassis |
| V Bedding Blocks |
| Scope Rail |
| Central Sight Blocks |
| Action Wrench |
| Cleaning Rod Guides |
| Barnard Target Trigger |
| Jewel Trigger Conversions for Model P |
| Model S & SM Trigger Hanger |
| Adjustable Rear Bag Rider |
| Model 07 Magazine Blank |
| Barnard Bi-Pod |
| Barnard Tikka Trigger |
| Trigger Guard |
| Have a Question? |
| Distributor Resources |
| Tech Drawings & Info |
| Barnard Trigger Instructions |
| User's Images |
+ Latest News
Barnard Model P Bix N Andy Triggers now in Stock
Bix N Andy have developed their own high-quality target/bench rest trigger for the Barnard model P Action. The trigger requires no hanger ... read more
Heavy Ejector Kits
Due to frequent requests from many customers for an ejector that doesn’t just release the brass, but throws it out, we have come t... read more
Heavy Striker Springs now Available
A frequent concern that we believed needed to be addressed is the strength of our striker springs. We often receive inquiries about our firing pin... read more
Barnard Model SC Action
The Model SC action is A cylindrical Remington 700 type action, with the same diameter receiver, mounting screw position and bolt turn position as the Remington 700 short exterior configuration. But in the Barnard three lug configuration and so "not a drop in" for the Remington 700.
As a three lug action the arc of bolt operation is shorter and the port is a different size and position. the length of the action is 10mm longer at the barrel end than the Remington 700 short action.
The S series actions were designed as target actions to take Remington 700 aftermarket triggers etc. they are more often than not fitted into Remington style Stocks. Very little work is needed to have the action fit the various 700 stocks.
A Single shot action derived of the Model S, with customized Bolt and Port configurations as follows-
- Right Bolt / Left Port (pictured)
- Left Bolt / Right Port
- Bolt face available in .223 and .308
The action receiver is of 4340 chrome/moly/nickel steel through hardened to 38Rc and finish machined after surface hardening to ensure concentricity. The bolt is casehardened EN39b, ground and machined after hardening to ensure straightness and concentricity. The bolt lugs are hand lapped to the matted receiver. Sako Type extractor and is equipped with a bolt face plunger style ejector.
We supply this action with a trigger hanger to suit either Timney or Jewel triggers, or with a blank hanger to be modified to the trigger of your choice (such as any "Remington style" clone). This action is supplied as standard with no trigger, but please specify which hanger you require when ordering.
Model SC Details |
|
| Receiver Length |
207mm (8.15") |
| Receiver Diameter |
34.5mm (1.359") |
| Bolt Diameter |
20mm (0.787") |
| Bolt Stop |
"Push" side lever. (Stop length adjustable for greater throw length) |
| Barrel Thread |
1 1/16" UNF X 16TPI |
| Bolt Face |
.223 to standard .308 |
| Striker Tip Diameter |
1.6mm (.062") |
| Action Mounting |
2 X 1/4" UNF at Remington spacing |
| Standard SC Action Weight Twin Port SC Action Weight |
1.061kg / 37.426oz (with Timney Trigger 1.150kg / 40.565oz)
1kg / 35.274oz (with Timney Trigger 1.09kg / 38.448oz) |
| Lock Time |
1.9 milliseconds seconds |
| Loading Port Length |
73mm (2.87") |
| Sight Mounting |
Drilled and tapped (M4) to suit most sights. e.g. Central, Redfield, RPA, Warner |
|
Rail Mounting |
Drilled & tapped (M4) for our full length scope rails |
| Finish | Blue/black as standard. |
Available Accessories
Recoil Options
The Model SC recoil options;- a Remington type lug between receiver and barrel
- use of a recoil spigot from the action (1/4" X 28 cap screw with the head machined concentric) which fits into a steel bushed hole in a 6061 aluminium bedding block that has been machined to provide 2 parallel points of contact on the action.