+ Latest News


03-May-2017

Cheryl Dey NRA High Master National Record Holder.

Cheryl Set a Record recently with her rifle built on a barnard P Action check out the NRA national’s records. http://competitions.nra.org/nation... read more


03-May-2017

Frank Diaz’s new record

Frank Diaz’s new record on dec-18-2012 200-26x and now 200-18x @ 500 yards. He now holds 3 national records. Midrange on 3/7/2015. Check out ... read more


03-May-2017

John Whidden won the 2017 Berger Southwest Nationals while shooting his P actioned Palma rifle.

· John Whidden won the 2017 Berger Southwest Nationals while shooting his P actioned Palma rifle. “That is the most accurate... read more


Technical Drawings and Information


These drawings are to aid in the production of Stocks and Barrels. 


Please note, they are subject to change without notice, and ensure that you are using the latest version.


Stock Information


Please note the following;-
  • That our preferred method for mounting a single shot action to your stock is with one of our V- bedding blocks.
  • Take the action screws down evenly, no particular sequence required. The actions are stiff, regular in shape, and have plenty of bedding area and so don’t appear to suffer the complexities of bedding that other actions have.



Barrel and Chamber information.

Suggested barrel to action torque of 70 ft/lbs.

Please Note the following;- 

  • These drawings are suggestions and should be used as guidance only
  • Case Protrusion safety. When fitting a barrel it is your responsibility to ensure that the breech is safe for the cartridge case in question. Keep the unsupported cartridge case to a minimum. “Safe protrusion” is for you to work out. Cases are different in shape, size, groove shape, rim thickness, wall thickness and internal shape. Section the case in question and match it against your chamber, is the internal powder space supported adequately in your chamber?? That is the question you need to ask yourself. Obviously feeding, bolt nose and extractor configuration require a compromise but safety is paramount. If at all in doubt see a qualified gunsmith to do the work for you.



Barnard Target Trigger Information

If you have any questions regarding or products please check out the FAQ section
Or contact us directly, we are always happy to help.